# Biomedical engineer manual

You see devices, gateways, maintenance, floor maps and utilities – not patient records.

## Devices
* **Device registry**: add or import devices, print QR labels, set criticality (high for ventilators, monitors, pumps, defibrillators), cost, AMC vendor, warranty and calibration dates.
* **Device models**: CarePulse-certified models are marked ✓; request new models through Caresoft.
* **Data quality**: "stuck sensor" and "impossible value" alerts point to probes or cables to check.
* Pill dispensers and smart inhalers are devices too (category *Smart pill dispenser* / *Smart inhaler*); they report through the vendor cloud.

## Gateways
* **Edge gateway** (hospital PC/VM): status, last heartbeat, queued items; offline > 15 min → critical alert. Install / config: `docs/EDGE_GATEWAY.md`.
* Monitor gateways (HL7), ADT, Modbus devices (fridges, gas, IO for nurse call), BLE RTLS gateways are configured in `edge.json`.

## Maintenance
* **Work orders**: breakdowns reported by nurses arrive with an alert; set status, assignee, vendor; **Complete** with resolution, parts, cost, certificate. Out-of-service time counts as downtime.
* **Plans**: PPM / calibration / electrical safety / QA per device or category; work orders open 7 days before due; overdue alerts.
* **Uptime report**: per device and category, MTTR, CSV for NABH.

## Floor maps and tracking
Upload floor plans, draw rooms and exits, place BLE gateways, register tags (asset / staff / infant / mother). Walk test every room and exit before go-live (`docs/RTLS_SETUP.md`).

## Cold chain, gas and utilities
Monitoring points with limits; excursion alerts; **time to critical** for LMO, DG fuel, water, UPS. Keep the gas plant alarm panels as primary.
