Medical gas and utilities monitoring
🧪 Pilot programme. Available now to pilot hospitals; onboarding includes certifying your device models. Join the pilot.
CarePulse reads oxygen, air and vacuum pipeline pressures, liquid oxygen tank level, oxygen purity, mains voltage, UPS battery, DG fuel and water tank level from existing transducers and meters. Engineering gets an alert when a value drifts out of range, and a time-to-critical forecast tells them when to order liquid oxygen or diesel.
What can be monitored?
- Oxygen, medical air and nitrous oxide line pressure, suction vacuum and cylinder manifold pressure.
- Liquid oxygen tank level and PSA oxygen purity.
- Mains voltage, load, UPS battery and DG fuel level.
- Overhead water tank level, chiller temperature and CO₂.
How are readings collected?
Most pressure transducers, tank level gauges and energy meters have a Modbus or 4–20 mA output. The CarePulse Edge gateway polls them over Modbus TCP or RTU and sends readings every few seconds; pressures can be sent in bar, psi, kPa or MPa.
Frequently asked questions
Does this replace the gas plant's area alarm panels?
No. Area alarm panels required by HTM 02-01 and IS 7396 stay in place. CarePulse adds remote visibility, trend history, escalation and forecasts.